"Please thank your men for their politeness and courtesy, it was a pleasure to have them working in our home and the floor looks pretty good too!"
Laminate wood floor restoration
Our laminate and engineered wood floor restoration services
Refinishing service via *specialist sanding equipment and application of hardwearing lacquers.
Replacing damaged areas of the laminate wood floor
Re affixing any loose areas of engineered floors.
Gap filling.
Supplying full aftercare information.
Complete installation of laminate floors.
*Because Laminate flooring is composed of a thin layer of real wood adhered to a hardwood backing it is very important to use the correct sanding equipment. We only use our purposely designed equipment for the sanding and preparation stage whereby a very exacting amount of the laminate wood surface is removed by the process thereby retaining the integrity of the wood and avoiding the risk of sanding through the thin layer of laminate and exposing the hardboard backing.
WARNING! In all cases AVOID THE USE OF DRUM SANDERS for this floor type!
What to expect - examples of our work
Damaged Laminate floor in Malvern
Before
The laminate wood floor was badly worn and had missing laminate strips. The floor was also scratched and required a full restoration.
Close up view of damaged and missing laminate wood floor strips
After
The laminated wood floor is now been completely restored with matching wood strips machined and cut to size and then affixed to the under board; the repairs were almost invisible and after sanding with our specialist sanding machines and lacquering the floor it looked like new again!
Laminate floor damaged
Before
This is a beech laminate floor in a Community Hall; there were a number of lifting sections of the laminate as well as missing and damaged blocks.
After
Once again we sourced the matching wood and machined the wood to size to replace any missing laminate strips; the loose areas of the floor were re glued and the floor sanded level and lacquered
Common problems with laminated floors and Solutions - We provide the full range of services
Common Problems
Likely causes
Our services
Damaged or missing laminate / top wood surface
Water damage or general wear and tear to laminate floor.
We will remove of all damaged sections of surface laminate wood then match and produce the wood, cut to size and affix the new laminate wood to the floor.
General poor appearance including scratches, stains and boards and lacking in definition.
Previously badly prepared and sanded.
Existing seals are inappropriate and obscure the wood.
General wear and tear.
We will sand the floor using specialist sanding machinery to ensure the accurate removal of the surface wood and whilst maintaining the integrity of the wood surface.
We will then apply 3 coats of good quality lacquer to protect and enhance the wood.
Wood laminate is difficult to clean and absorb water; flaking seals and polishes.
Incorrect or lack of floor protection.
We will treat the engineered floor as above.
Loose laminate flooring
Water damage, general wear and tear.
We will re affix all loose areas using suitable adhesives.
